Smart of Technology

Troubleshooting Damage On Laptop / Computer

Posted: 06 Aug 2013 11:46 PM PDT

Troubleshooting Damage On Laptop / Computer - Perhaps you have experienced damage to either of Software and Hardware on Laptop / Computer you. And for those of you who still do not quite understand, it would feel very confused.

On this occasion I will discuss about Troubleshooting Damage On Laptop / Computer:

1. Problem: LCD only white screen appears, rocking or flashes when the screen is opened / closed.

Solution: Check the LCD data cable that is connected to the mainboard. If necessary, must let loose first then wipe and reinstall, add insulation on the cable behind the LCD.

2. Problem: When the laptop is turned on, the power indicator lights only light up momentarily and then die back.

Solution: Uninstall and then off processor mainboard. Check first and then plug it back processor. Make sure everything is connected properly. If there is no change possible damage to the mainboard.

3. Problem: When the laptop is turned on indicator light lit but no display.

Solution: Remove and clean the memory. Possible damage may occur on the memory, processor, motherboard or LCD.

4. Problem: Laptop will not turn on, the indicator light just blinks.

Solution: Possible faulty mainboard.

5. Problem: The laptop screen sometimes appear and sometimes death.

Solution: Check the LCD cable and inverter in the back of the LCD. Make sure everything is connected properly.

6. Problem: Optical drives such as CD / DVD not detected.

Solution: Make sure the CD / DVD is connected to the socket connector properly.

7. Problem: CD / DVD drive is difficult to read media CD / DVD or can not do the burning.

Solution: optical may be weak or damaged and must be replaced.

8. Problem: Display image is not perfect.

Solution: Reinstall the VGA driver, update to the latest drivers if necessary.

9. Problem: Laptop hard to be lit.

Solution: Clean the on / off button, replace if necessary.

10. Problem: The operating system can not be shut off automatically and must be manually.

Solution: Re-install the camera driver or the possibility of damage to the operating system.

11. Problem: Laptop frequent restarts before entering operating system.

Solution: Setting SATA to IDE mode, if it gives a chance then likely already Runtime Memory

12. Problem: After a few minutes / hours of laptop often die alone.

Solution: There may be overheating, clean the vents of dust and make sure the fan is still functioning properly. If necessary replace the pasta processor.

Blog Ku

Smart of Technology

Smart of Technology

No comments:

Popular Post